FSX AK Air Gulfstream G100. This is an AK Air repaint for the Project Gulfstream G100. AK Air is a fictional airline that is based in Bakersfield, California. By Andre Karrs.
FSX Gouvernement du Quebec CL-604 Challenger, registration C-FURG. This plane is used for medevac and aerial shuttle of medical patients. Textures only. Model by Premier Aircraft Design. Repaint by Jean-Pierre Fillion.
FSX Netjets Cessna Citation, registration N916QS. Textures only for the Eaglesoft Design Group mode. Repaint by Bruce Leehan.
FSX EVO Embraer Phenom 100EV AGS V2L, registration N775EV. New Animated Ground Servicing. New landing / taxi soft light beams. New 2D panel. New spoilers added. Interior animations (Shift+E+2). Model design and paint by Camil Valiquette (CamSim).
FSX Embraer Phenom 100EV AGS V2L, registration PP-XEV. New Animated Ground Servicing. New landing / taxi soft light beams. New 2D panel. New spoilers added. Interior animations (Shift+E+2). Model design and paint by Camil Valiquette (CamSim).
FSX/P3D v3,v4 North American T-39 Sabreliner. The North American Sabreliner, later sold as the Rockwell Sabreliner, is an American mid-sized business jet developed by North American Aviation. It was offered to the United States Air Force (USAF) in response to its Utility Trainer Experimental (UTX) program. It was named "Sabreliner" due to the similarity of the wing and tail to North American's F-86 Sabre jet fighter. Military variants, designated T39 Sabreliner, were used by the USAF, United States Navy (USN) and United States Marine Corps (USMC) after the USAF placed an initial order in 1959. The Sabreliner was also developed into a commercial variant. FSX/P3Dv3,v4 native upgrade by A.F. Scrub.
FSX Update Of A.F. Scrub's Update Of Mike's T-39. This is an update for FSX of A.F. Scrub's update of Mike Stone's North America Rockwell T-39 Sabreliner. I did the usual update of the flight dynamics; changed the smoke effect; got rid of the cab file that was making the aircraft load real slow; all that was needed from it was the gauge for the auto slats, when you use the default Lear 45 gauges; corrected the contact points; changed the view for the 2D panel, and changed the size of the GPS. This is the whole aircraft. By Bob Chicilo.
FSX Luxery Biz Jet C20, a 5800 nm, ten passenger concept business jet. including interior special animations and exterior Animated Ground Servicing (AGS). Model design and paint by Camil Valiquette.
FSX Cessna Citation X Update. Update for FSX of CessnaCitation X. This is an update for FSX of the Cessna Citation X by Chuck Dome. I have updated the flight dynamics, added the other wheels, corrected the contact points, fuel load, and max gross weight. I added or changed gauges to working ones for FSX. There is a VC with some working gauges, but the forward view only shows when you are heading between 200 to 238 degrees and 019 to 058 degrees compass headings; so it cannot be used to fly the aircraft. The textures are only solid in daylight; dawn, dusk, or at night the textures are there but transparent like clear colored plastic. If any of you painters out there know how to fix this, I believe at least some people would appreciate it. This aircraft was originally made for FS2002. By Bob Chicilo.
FSX Stellweg Airlines Canadair CL-604. This is the corporate aircraft of The DFW Group, operated by Stellweg Airlines. This is a complete aircraft, model included with the default panel and sound (Bombardier CRJ700). Model by Barry Blaisdell. Repaint by The DFW group / D. Stellweg.
FSX Embraer Phenom 100 PP-XOH biz jet by CamSim, including exterior animated ground servicing (AGS) and special interior animations and configuration: four passengers in seating position and one passenger who will stand up and walk back and forth in the cabin and return to his "seating position", plus pilot and co-pilot moving arms. Model design and paint by Camil Valiquette.
FSX Executive Express Embraer Phenom 300 bizjet by CamSim, including exterior Animated Ground Servicing (AGS) and special interior animations and configuration: six passengers in seating position and one stand up passenger that can be animated to walk back and forth in the cabin. Model design and paint by Camil Valiquette.
FSX Beechcraft Beechjet 400A, version 2. The Beech Aircraft Corporation acquired the Diamond II executive jet from Mitsubishi in December 1985. It was then marketed as the Model 400 Beechjet. The first Beech assembled aircraft rolled out on May 19, 1986. It wasn't until 1989 that the Model 400A was introduced featuring increases in payload and ceiling. This version is visually a model of the 400A Beechjet, the first version was visually that of the Model 400. There are two added features in this version: reflective textures and visual thrust reversers. Model, originally for FS2004 has been updated to work in FSX. By John B. Loney, Jr.
Like & Share
UK2000 Scenery - Inverness Xtreme 2019After many months and creating new models and textures, we can finally release the first new product featuring HD and multi material textures, plus improved models. Primarily made for Prepar3D V4, there will also be an X-Plane version and hopefully a version for the new MSFS 2020 when it's...
Carenado Previews F50 For X-PlaneCarenado have released some new F50 screenshots for the upcoming X-Plane 11 payware Source
VATSIM Announces Infrastructure UpgradesLast weekend, August 10th and 11th, VATSIM's Network Services department embarked on an ambitious project to complete the modernization of our user-facing FSD servers. We provisioned 6 brand new FSD servers and retired the majority of our legacy infrastructure. Previously, VATSIM used a...
Flight Sim Show 2019 AnnouncedComing Soon - Flight Sim 2019 -- The Perfect Weekend Away!Date: 5th - 6th October 2019 Cost: £12 per day or £22 for the weekend. Buy in advance now for £10 per day or £18 for the weekend. Once again aviation fans can experience the best that virtual flight has to offer when Flight Sim 2019 takes...
Carenado S330 P3D/FSX ReleasedFeatures Full FSX, FSX: Steam, P3D v4.4 (and up) compatible Flight1 GTN 750 and Reality XP GTN 750* integration Dynamic cockpit animations Sequence Startup Procedure Cold and Dark start option Original autopilot installed HD quality textures (4096 x 4096) Real S330 sounds Real behavior compared to the...
Photosim Labs Previews Bahamas SceneryPhotosim Labs has just released some news about their upcoming Bimini And Cat Cay scenery for FSX and Prepar3D. The scenery will include two highly detailed airports, several heliports and two seaplane bases with assigned docks. The included screen shots show it's close to completion. Source
Microsoft Flight Simulator August Development UpdateThe team is excited to move into the next phase of communication with the community regarding our development plans. As we mentioned in our July 25th update, August is about setting expectations regarding our development process through launch. September is about defining how we will involve the...
Microsoft Retakes Control Of FSXIn 2014 Microsoft entered into an agreement allowing Dovetail Games to bring Flight Simulator X to Steam. Today, we are announcing that we've reached the end of our partnership agreement. We would like to take this opportunity to express our sincere appreciation to Dovetail Games for the...
Orbx Cross-Platform Change of Policy NoticeAs you know, over the past year we have worked tirelessly to bring many of your Orbx favorites from the ESP platforms over to X-Plane 11. What started out as dipping a toe in the water has now led to over 20 products being both natively developed and ported over to Laminar's platform, and we are...
FSExpo 2020 Venue and Date AnnouncementFlightSimExpo Announces 2020 Dates And Las Vegas Venue. After welcoming almost 1,700 pilots and flight simmers to Orlando in 2019, FlightSimExpo returns to its Las Vegas roots in June. The third annual FlightSimExpo will take place at Tropicana Las Vegas on June 12-14, 2020. Attendees and...